Troubleshooting Guide for Fisher & Paykel Dishwasher Drawer Not Draining

Fisher & Paykel Dishwasher Drawer Not Draining

Experiencing issues with your Fisher & Paykel dishwasher drawer not draining can be frustrating, but fear not – we’re here to help you diagnose and solve the problem.

Fisher & Paykel Dishwasher Drawer Not Draining

In this troubleshooting guide, we’ll walk you through step-by-step instructions to identify common issues and provide effective solutions to get your dishwasher back in top working condition.

  1. Check for Blockages in the Drain Hose: One of the most common reasons for a dishwasher drawer not draining is a clogged drain hose. Begin by inspecting the hose for any visible debris, such as food particles or soap scum. Disconnect the hose and clean it thoroughly. Reconnect and check if the drainage improves.
  2. Examine the Drain Pump: The drain pump plays a crucial role in expelling water from the dishwasher. Locate the pump and ensure there are no obstructions hindering its operation. If you find any debris, carefully remove it and test the dishwasher again.
  3. Inspect the Air Gap: A malfunctioning air gap can impede proper drainage. Check the air gap, typically located on the sink or countertop, and clear any debris that might be blocking it. A clean air gap ensures smooth water flow and helps prevent drainage issues.
  4. Verify the Drain Valve: The drain valve controls the release of water from the dishwasher. Test the valve for any signs of damage or blockages. If necessary, clean or replace the valve to restore proper drainage functionality.
  5. Examine the Filter: Dishwasher filters are designed to trap debris, preventing it from entering the drainage system. Over time, filters can become clogged. Remove and clean the filter, ensuring that water can flow freely through it.
  6. Check for Excessive Suds: Excessive use of detergent can lead to the formation of too many suds, hindering drainage. Use a dishwasher-safe detergent in moderation, and run a cycle without dishes to clear any excess suds.
  7. Run a Cleaning Cycle: Perform a dishwasher cleaning cycle using a specialized dishwasher cleaner. This helps eliminate built-up residue and ensures all components, including the drainage system, are free from any contaminants.


By systematically troubleshooting the issues causing your Fisher & Paykel dishwasher drawer not to drain, you increase the likelihood of identifying and resolving the problem. If, after following these steps, the issue persists, it may be advisable to seek professional assistance. Remember to consult your dishwasher’s manual for model-specific guidance and always prioritize safety during troubleshooting.

Note: You can find more dishwasher parts here.

More Dishwasher Troubleshooting Guides:

    Affiliate Disclosure: "This site may contain affiliate links, which means I may earn a commission if you click on them and make a purchase. However, this comes at no extra cost to you. These commissions help support the site and keep it running. Thank you for your support!"

    Leave a Comment