A washer is an essential household appliance, and it can be frustrating when it suddenly stops spinning. A Whirlpool washer is a popular brand used in many homes, and if it won’t spin, it can be a real headache.
Fortunately, most spin issues can be resolved with a few simple fixes. In this article, we will discuss the common causes of Whirlpool washer spin problems and how to fix them.
Table of Contents
- Why Is the Whirlpool Washer Not Spinning?
- Mechanical Issues That Prevent Spinning
- Broken Drive Belt
- Worn Motor Coupling
- Defective Lid Switch
- Electronic Issues That Prevent Spinning
- Faulty Control Board
- Malfunctioning Motor
- Burnt Out Fuse
- Troubleshooting Steps to Fix Whirlpool Washer Spin Problems
- Check the Power Source
- Inspect the Drive Belt
- Check the Motor Coupling
- Inspect the Lid Switch
- Test the Control Board
- Inspect the Motor
- Check the Fuse
- Conclusion
- FAQs
Why Is the Whirlpool Washer Not Spinning?
A Whirlpool washer that won’t spin can be caused by either mechanical or electronic issues. Mechanical issues are problems with the physical components of the washer, while electronic issues are problems with the electrical system of the washer.
Mechanical Issues That Prevent Spinning
Broken Drive Belt
The drive belt is a critical component that transfers power from the motor to the drum of the washer. If the drive belt is worn or broken, the washer won’t spin.
To check if the drive belt is the problem, turn off the power to the washer, and check the belt for signs of wear or damage.
Worn Motor Coupling
The motor coupling connects the motor to the transmission. If the motor coupling is worn or damaged, the washer won’t spin.
You can check the motor coupling by removing the cabinet of the washer and inspecting the coupling for any visible signs of wear or damage.
Defective Lid Switch
The lid switch is an essential safety feature of the washer. It prevents the washer from spinning when the lid is open.
If the lid switch is defective, the washer won’t spin, even when the lid is closed. To test the lid switch, use a multimeter to check for continuity.
Electronic Issues That Prevent Spinning
Faulty Control Board
The control board is the brain of the washer. It controls all of the washer’s functions, including the spin cycle.
If the control board is faulty, the washer won’t spin. To test the control board, use a multimeter to check for continuity.
Malfunctioning Motor
If the motor is malfunctioning, the washer won’t spin. The motor is responsible for turning the drum of the washer during the spin cycle.
To test the motor, use a multimeter to check for continuity.
Burnt Out Fuse
A burnt-out fuse can cause the washer to stop spinning. The fuse is a safety feature that prevents the washer from overheating.
If the fuse is blown, the washer won’t spin. To test the fuse, use a multimeter to check for continuity.
Troubleshooting Steps to Fix Whirlpool Washer Spin Problems
Check the Power Source
The first step in troubleshooting a Whirlpool washer spin problem is to check the power source. Make sure the washer is plugged in and that the circuit breaker hasn’t tripped.
Inspect the Drive Belt
If the power source is okay, the next step is to inspect the drive belt. Turn off the power to the washer and check the belt for any signs of wear or damage. If the belt is worn or broken, replace it.
Check the Motor Coupling
If the drive belt is okay, the motor coupling may be the problem. Remove the cabinet of the washer and inspect the motor coupling for any signs of wear or damage. If the coupling is worn or damaged, replace it.
Inspect the Lid Switch
If the motor coupling is okay, the lid switch may be the problem. Use a multimeter to check for continuity. If there is no continuity, the lid switch is defective and needs to be replaced.
Test the Control Board
If the lid switch is okay, the control board may be the problem. Use a multimeter to check for continuity. If there is no continuity, the control board is faulty and needs to be replaced.
Inspect the Motor
If the control board is okay, the motor may be the problem. Use a multimeter to check for continuity. If there is no continuity, the motor is faulty and needs to be replaced.
Check the Fuse
If the motor is okay, the fuse may be the problem. Use a multimeter to check for continuity. If there is no continuity, the fuse is blown and needs to be replaced.
Note: You can read more details for Whirlpool Washing Machine Repair Help at Repair Clinic here.
Conclusion
A Whirlpool washer that won’t spin can be frustrating, but most spin problems can be resolved with a few simple fixes. Mechanical and electronic issues can both cause spin problems.
If your Whirlpool washer won’t spin, check the drive belt, motor coupling, lid switch, control board, motor, and fuse. By troubleshooting these components, you can identify the problem and fix it quickly and easily.
FAQs
- What should I do if my Whirlpool washer won’t spin?
If your Whirlpool washer won’t spin, check the drive belt, motor coupling, lid switch, control board, motor, and fuse. By troubleshooting these components, you can identify the problem and fix it quickly and easily.
- Can a worn drive belt cause a Whirlpool washer to stop spinning?
Yes, a worn drive belt can cause a Whirlpool washer to stop spinning. The drive belt transfers power from the motor to the drum of the washer. If the drive belt is worn or broken, the washer won’t spin.
- How do I test the lid switch on my Whirlpool washer?
Use a multimeter to check for continuity. If there is no continuity, the lid switch is defective and needs to be replaced.
- What should I do if the motor in my Whirlpool washer is malfunctioning?
If the motor in your Whirlpool washer is malfunctioning, it needs to be replaced. Use a multimeter to check for continuity. If there is no continuity, the motor is faulty and needs to be replaced.
- Can a blown fuse cause a Whirlpool washer to stop spinning?
Yes, a blown fuse can cause a Whirlpool washer to stop spinning. The fuse is a safety feature that prevents the washer from overheating. If the fuse is blown, the washer won’t spin.
You might be interested:
