Maytag Washer Troubleshooting Guide: 10 Common Problems and Fixes

Is your Maytag washer acting up? Don’t worry; we’ve got you covered. This Maytag washer troubleshooting guide will walk you through ten common problems and their corresponding solutions, helping you get your laundry routine back on track.

“Fix It Fast: Your Maytag Washer Guide”

---

Maytag Washer Troubleshooting Guide

1. Washer Won’t Start

• Problem: Your Maytag washer refuses to start when you press the power button.
• Solution: Ensure the washer is plugged in, the circuit breaker is on, and the door is securely closed. If the issue persists, check the power outlet and the washer’s power cord for damage.

2. Washer Not Draining Properly

• Problem: Water remains in the washer after a cycle, or the washer stops draining.
• Solution: Check for clogs in the drain hose and filter. Ensure the drain hose is not kinked. If these are clear, inspect the drain pump for debris or blockages.

3. Excessive Vibration and Noise

• Problem: Your Maytag washer shakes excessively or makes loud noises during the spin cycle.
• Solution: Make sure the washer is level on the floor. Adjust the feet if necessary. Also, check for any loose objects inside the drum, as they can cause imbalance.

4. Clothes Come Out Wrinkled

• Problem: Your clothes come out of the washer with wrinkles.
• Solution: Avoid overloading the washer, as this can lead to wrinkling. Use the appropriate cycle and select a lower spin speed for delicate fabrics.

5. Washer Leaking Water

• Problem: Water is leaking from your Maytag washer.
• Solution: Inspect the hoses, connections, and detergent dispenser for leaks or loose fittings. Replace any damaged parts and tighten connections as needed.

6. Foul Odor in the Washer

• Problem: Your washer smells bad, and your clothes might also have an unpleasant odor.
• Solution: Run a cleaning cycle with hot water and vinegar or a commercial washer cleaner. Leave the door ajar after each use to allow air circulation and prevent mold growth.

7. Error Codes on the Display

• Problem: Your Maytag washer displays error codes, making it difficult to use.
• Solution: Refer to your owner’s manual to decode the error messages. Many error codes indicate specific issues that you can address yourself or with the help of a technician.

8. Washer Doesn’t Agitate

• Problem: The agitator in your Maytag washer isn’t moving during the wash cycle.
• Solution: Check for obstructions around the agitator. If it’s still not working, there may be an issue with the agitator itself, requiring professional repair.

9. Clothes Are Soaking Wet After Spin Cycle

• Problem: Even after the spin cycle, your clothes are dripping wet.
• Solution: Examine the drain pump and the washer’s drain system for blockages. If everything appears clear, the issue may be related to a malfunctioning motor or control board.

10. Washer Doesn’t Dispense Detergent

• Problem: The detergent isn’t dispensed into the washer during the cycle.
• Solution: Clean the detergent dispenser drawer regularly to prevent clogs. Check the water pressure and ensure the water supply hoses are not kinked or blocked.

By following these troubleshooting steps, you can address many common issues with your Maytag washer. If problems persist or if you’re uncomfortable with DIY repairs, it’s always a good idea to consult a professional technician for assistance. Maintaining your washer regularly and using it properly can also help prevent future problems.

Note: You can find more washer troubleshooting guides here.

---

Top Washer Machine Parts for Maytag

---

Common Damaged Parts for Maytag Washers

Maytag washers, like any other appliances, can experience wear and tear over time. Common damaged or faulty parts in a Maytag washer can include:

1. Drive Belt: The drive belt is responsible for turning the drum. If it’s worn or damaged, it can lead to issues with spinning and agitation.
2. Drain Pump: The drain pump removes water from the washer. A malfunctioning pump can result in water not draining properly.
3. Lid Switch: This safety feature prevents the washer from running with the lid open. If it fails, the washer may not start or stop unexpectedly.
4. Door Seal or Gasket: If the door seal is damaged, it can lead to leaks during the wash cycle.
5. Water Inlet Valve: Problems with the water inlet valve can cause issues with water not filling the washer correctly or not stopping when it should.
6. Timer or Control Board: Malfunctions in the timer or control board can lead to issues with the washer not advancing through cycles or not responding to controls.
7. Suspension Springs or Shock Absorbers: These components help stabilize the drum during the wash cycle. Damaged springs or shock absorbers can cause excessive vibration or noise.
8. Agitator or Agitator Dogs: If the agitator isn’t working properly, it can lead to problems with clothes not being cleaned thoroughly.
9. Motor Coupling: The motor coupling connects the motor to the transmission. When it’s damaged, the washer may not agitate or spin.
10. Pressure Switch: The pressure switch regulates the water level in the washer. Issues with it can result in incorrect water levels.
11. Lid Lock: Some Maytag washers have a lid lock mechanism to prevent opening during the spin cycle. A malfunctioning lid lock can cause the washer not to start.
12. Bearings: Damaged drum bearings can result in excessive noise during the spin cycle.
13. Clutch Assembly: Problems with the clutch can lead to issues with the washer not spinning properly.
14. Detergent Dispenser: A broken detergent dispenser can result in improper detergent distribution during the wash cycle.
15. Hoses and Water Inlet Filters: Clogs or leaks in hoses or filters can affect water supply and drainage.
16. Tub Seal: A damaged tub seal can lead to water leaks.
17. Drum or Tub: Rarely, the drum or tub itself can become damaged, which may necessitate a more extensive repair.

---

Compare Prices: Maytag Washer Parts on eBay

---

You May Need These Washer Parts:

---

Other Washer Troubleshooting Guides:

---